剛學(xué)不久~

我要做24H製的時鐘~但我一直DEBUG~一直用不出來~

我Xilinx ISE 8.2i軟體~

請會的人幫我看一下哪出錯了~謝



library IEEE;

use IEEE.STD_LOGIC_1164.ALL;

use IEEE.STD_LOGIC_ARITH.ALL;

use IEEE.STD_LOGIC_UNSIGNED.ALL;

---- Uncomment the following library declaration if instantiating

---- any Xilinx primitives in this code.

--library UNISIM;

--use UNISIM.VComponents.all;

entity CLOCK_00_60 is

    Port ( CLK : in  STD_LOGIC;

           RESET : in  STD_LOGIC;

           ENABLE : out  STD_LOGIC_VECTOR (6 downto 0);

           SEGMENT : out  STD_LOGIC_VECTOR (6 downto 0));

end CLOCK_00_60;

architecture Behavioral of CLOCK_00_60 is

signal SCAN_CLK :STD_LOGIC;

signal COUNT_CLK :STD_LOGIC;

signal DECODE_BCD :STD_LOGIC_VECTOR (3 downto 0);

signal mineable :STD_LOGIC;

signal hreable :STD_LOGIC;

signal POSITION:STD_LOGIC_VECTOR (6 downto 0);

signal DIVIDER:STD_LOGIC_VECTOR (29 downto 1);

signal COUNT_BCD:STD_LOGIC_VECTOR (23 downto 0);

begin

-------------------------------------------------

process (CLK,RESET)

begin

if RESET = '0' then

 DIVIDER <= ( others => '0');

elsif CLK' event and CLK = '1' then

 DIVIDER <= DIVIDER + 1 ;

end if;

end process;

COUNT_CLK<=DIVIDER(24);

SCAN_CLK<=DIVIDER(15);

------------------------------------------------秒

process(RESET,SCAN_CLK)

begin

if RESET = '0' then

 COUNT_BCD <= ( others => '0');

elsif SCAN_CLK' event and SCAN_CLK = '1' then

 if   COUNT_BCD(3 downto 0)= x"9" then

    COUNT_BCD(3 downto 0)<= x"0";

    COUNT_BCD(7 downto 4)<= COUNT_BCD(7 downto 4)+1;

 else

   COUNT_BCD(3 downto 0)<= COUNT_BCD(3 downto 0)+1;

 end if;

end if;

end process;

mineable <= '1' when COUNT_BCD(7 downto 0) = x"59" else '0';

----------------------------------------------------------分

process(RESET,SCAN_CLK)

begin

if RESET = '0' then

 COUNT_BCD <= ( others => '0');

 if mineable = '1' then

elsif SCAN_CLK' event and SCAN_CLK = '1' then

 if   COUNT_BCD(11 downto 8)= x"9" then

    COUNT_BCD(11 downto 8)<= x"0";

    COUNT_BCD(15 downto 12)<= COUNT_BCD(15 downto 12)+1;

 else

   COUNT_BCD(11 downto 8)<= COUNT_BCD(11 downto 8)+1;

 end if;

end if;

end if;

end process;

hreable <= '1' when COUNT_BCD(15 downto 8) = x"59" else '0';

-------------------------------------------------------------時

process(RESET,SCAN_CLK)

begin

if RESET = '0' then

 COUNT_BCD <= ( others => '0');

  if mineable = '1' and hreable = '1' then

elsif SCAN_CLK' event and SCAN_CLK = '1' then

 if   COUNT_BCD(19 downto 16)= x"9" then

    COUNT_BCD(19 downto 16)<= x"0";

    COUNT_BCD(23 downto 20)<= COUNT_BCD(23 downto 20)+1;

  if   COUNT_BCD(19 downto 16)= x"2" then

   COUNT_BCD(23 downto 20)<= x"0";

 else

   COUNT_BCD(19 downto 16)<= COUNT_BCD(19 downto 16)+1;

  end if;

 end if;

  end if;

end if;

end process;



process(RESET,SCAN_CLK)

begin

if RESET = '0' then

 POSITION <= "1111110";

elsif SCAN_CLK' event and SCAN_CLK = '1' then

 POSITION<="111111"&POSITION(0);

end if;

end process;

ENABLE<=POSITION;

-----------------------------------------------------------

process(POSITION,SCAN_CLK)

begin

case POSITION is

 when "1111110" => DECODE_BCD <=COUNT_BCD(3 downto 0);    --秒

 when "1111101" => DECODE_BCD <=COUNT_BCD(7 downto 4);    --秒

 when "1111011" => DECODE_BCD <=COUNT_BCD(11 downto 8);   --分

 when "1110111" => DECODE_BCD <=COUNT_BCD(15 downto 12);   --分

   when "1101111" => DECODE_BCD <=COUNT_BCD(19 downto 16);   --時

   when "1011111" => DECODE_BCD <=COUNT_BCD(23 downto 20);   --時

 when others => null;

end case;

end process;

 

with DECODE_BCD Select

SEGMENT<= "1000000" when X"0",

  "1111001" when X"1",

  "0100100" when X"2",

  "0110000" when X"3",

  "0011001" when X"4",

  "0010010" when X"5",

  "0000010" when X"6",

  "1111000" when X"7",

  "0000000" when X"8",

  "0010000" when X"9",

  "1111111" when others;

end Behavioral;